2013 Subaru Outback Install Philips CSP Chips Headlight Bulbs



The installation of the light on a 2013 Subaru Outback on the left side is Okay but on the right side for the main headlight(low beam) is next to impossible with out removing the whole headlight from the vehicle with in addition requires removing the bumper.

I took my caravan for a short drive after installation. They look awesome when you look at the car. Crisp, white with a bluish tinge.. They're pretty bright, when you compare them to the stock halogens against a wall right in front of the car, led headlight looks stronger, as you can see in the picture. when driving around, the light beam just seems weak a little. Later I found that it is not because lighting is being weaker... the problem is that anything over 6000K-7000K in color will lack "darkness piercing" ability, meaning they really don't light up the road very usefully. For the best penetration in the darkness, you want between 4000k-5000k (there'll be people that argue that sunlight is 5300k so that must be the best)

These bulbs are totally plug and play, I means they don’t need resistors to increase the working power. They don’t have cooling fans, I don’t need to worry about fans broken.  






































Pictures offered by Ledoauto

评论

发表评论

此博客中的热门博文

Volkswagen Golf 7 Upgrading Pure White LED Daytime Running Light

图片
Do you like Golf 7 factory original DRL? I think many Golf 7 owner say no. That yellow small eyes, no wonder are named it candle light. Fortunately, it is easy to replace this pair of DRL bulbs. Open the lip, look at the place behind your headlamp, there is a plastic cover. Open that cover, find where the DRL are according to its position in the headlamp, pull it out and we can replace it. Golf 7 DRL bulbs are PW24W base. Not too many bulbs with this base on the market. I recommend you to buy Cree 50W HighPower LED Bulbs . Cree chips, high lumen, high working current and not easy to break. Especially the working current, Cree bulb could reach 10W and reach the requirement of inspect system. You won’t meet CANBus problem after Installation. Here is my installation process and lighting effect.
阅读全文

How to Adjust Headlights for the Perfect Aim!

图片
Have you ever been blinded by someone else’s headlights, or noticed that your own headlights are not illuminating the road directly in front of you? If all you can see is the foliage on the side of the road, or oncoming drivers are constantly flashing their high beams or honking their horn at you, most likely your headlights are misaligned and giving those other drivers an eyeful. They're easy to adjust with a few measurements and a screwdriver. As the automotive lighting manufacturer in China , we are going to tell you how to adjust headlights for the perfect aim step by step. 1, Level your car. Start by removing any excess weight from the trunk of the car. Also, ensure that the tire pressure in all tires is at the manufacturer's recommended levels. If possible, have somebody sit in the driver's seat, and that the gas tank is half-full. As well as this, check that your headlight aim adjustment wheel (if fitted) is at the zero position. 2, Position your car.
阅读全文

Ford Mustang Modified New Ferrari 458 Circle LED Taillight

图片
Recently I notice that there is new coming Ferrari 458 LED taillight OEM fitted Ford Mustang on  Chinese Taobao. I just can’t help trying immediately. I guess this one is from America imported, because no other store selling it. But I search it on cjponyparts and can’t find the same one. Whatever, try it first.  It not only looks like Ferrari 458 Tallight but also a little like Ford GT40 taillight, this circle LED tail light has red and yellow available with new led technology. Plug is same to mustang and directly play on 2015-2017 Mustang. It is interesting to install it. A new style comes to my Mustang. The best thing is I can get the original taillight back whenever I want. Very simple installation.
阅读全文