Tutorial: How to Install Led Fog Light Bulbs on 13-15 Honda Accord

Replacement Bulb Selection:

H11 led bulbs, it can fit in the h8 bulb for fog light as well without any problem. It’s better to choose plug-and-play type with ease insulation, I don't like splicing wires cutting wires, because in my mind, that brings some kind of potential risk to my vehicle.

Vehicles:

2013 Honda Accord, the 14 Accord or 15 Accord look the same, it seems that nothing is changed on these cars. Fog lights make the car look amazing, once you make a little change on it, the fog lights are definitely something that can bring you a whole different frontend at night. Having some white fog lights to match up your white headlight lighting is definitely a good idea.

We're going to replace the fog light bulb on the passenger side first and then the driving side. They're both a little bit different because of how the placement of all the fog light bulbs are in the car, but I promoise, it is not too hard. Nothing is too hard when dealing with lights. So the first step first let's get to it.

1) Go underneath the car and get flathead screwdriver to get two screws out. It's very simple to get these like push tabs out.

2) Next step, this is only for the passenger side, the driver side is different. For the passenger side all you do is grabbing in, but you know pushing this tab back once you've taken the screws out. These tabs all you have to do is find the actual bulb and it's not that difficult to find. I've twisted it out and now just pull it out slowly and this is all done underneath.

3) The next is slide your hand back in, go all the way to the actual housing and you will see there you have the bulb. It's come through already and now basically twisted in place. You have your bulb already settled in, twisted in place. Then make sure the socket is in place and that's a simple clicking the tab in.

Come to the driver side fog lights. It's a little bit different, basically put the head screwdriver and put it in this hole. Go all the way until hit a screw in and you will see the screw. 

The next step is to get the tab off. This tab right here has to come off. You take off this tab and is as simple as putting a screwdriver in, clicking the tab, and pulling it out. 

Next, unscrewing these two screws, then you are able to take the fog lamp out.

The next step is to disconnect the power supply to fog light. Then you're going to twist this old bulb out.

Final step, place the new bulb into the actual socket and twist it in place. That everything is good to go, it's already in there, the next step is to put the wire back is to put in the socket back in. It's completely reversed then there it's already in place, put the two screws back in put the cover back on.

I am in love with this bulb, they just look so beautiful. It's kind of it's really funny this will match 5000k HID perfectly. This just makes the car look amazing, these are pure white 6000k LED bulbs. I'm loving the brightness output of this just looks amazing.