CHMSL (Center High-Mount Stop Light) is put
on back of a automotive vehicle for brake light. It can clear increase the conspicuity
of the car, allowing other drivers and pedestrians to see a vehicle’s presence,
position, size, direction of travel, and the driver’s intentions regarding direction
and speed of driving.
A car with CHMSL could be safer on off-road
driving. Fortunately, Ford fox has this kind of CHMSL on the back with 5 pcs of
T10 halogen bulbs. In order to let it make the maximum impact. We could replace
these T10 stock bulbs into
T10 LED. As we know, good quality LED could offer
high brightness and faster emitting speed while we turn it on. Besides, LED has
longer life span, we don’t need to worry it for a long time once we replace the
bulbs.
It is not a difficult thing to swap out the
stock bulbs from the Classic Fox and replace them with new T10 LED bulbs. The
lamp is installed in to car, we only need to rotate the screw, loose them and
take out the lamp. Replace the bulbs and put it back the original place. Here I
would like to tell you a tips. Pls remember to buy the
T10 194 bulbs no polarity.
If with polarity, you put the lamp back and start the engine, you may find you
put some bulbs on wrong side, then you have to take it down and do again.
评论
发表评论